05 58 59 60 61 62 63 64 Chevrolet Clutch, transmission, linkage

61 clutch assy 61 clutch — $1.00

59-60 CLUTCH CLUTCH ASSEMBLY — $10.00

05.010 Bell crank (Z bar) supports

5417 58-59 Bell crank support all manual transmission welds to frame — $30.20

3890 60-64 Bell crank support all manual transmission welds to frame — $30.20

05.010 Bell cranks (Z bars)

5315 58 Bell crank all V8 GM 3749637 — $107.69

5317 59 Bell crank all V8 GM 3756928 — $107.69

5318 60-61 Bell crank all V8 GM 3777429 — $97.90

4289 62-64 409 Bell crank GM 3846883 — $97.90

5321 62-64 Small block bell crank GM3846881 — $97.90

05.050 Flywheel dust covers

5778 58-63 Flywheel dust cover 6 cyl upper — $22.00

1057 58-63 Flywheel dust cover front 3 and 4 spd — $25.40

1058 58-63 Flywheel dust cover lower 3 and 4 spd — $57.81

9244 62 and up Chrome powerglide flexplate dust cover Will not fit 168 tooth flexplate — $27.00

1059 63-65 Powerglide flexplate dust cover w/409 engine — $150.00

1059A 64 Up 3 and 4 speed 409 flywheel dust cover — $48.00

5707 64 Up flywheel dust cover w/manual transmission small block — $39.95

9200 Flexplate dust cover turbo 350 400 700R4 — $34.95

05.080 Bell housing

8338. 58-59 Original bell housing bolts — $14.00

3241. 58-63 Bell housing bolt kit — $16.64

3242. 58-64 4 Speed transmission to bell housing bolt 8pcs — $5.15

3241A. 58-64 Bell housing to block dowel pins 2pcs — $17.50

7349 58-64 Cast aluminum GM style bell housing up to 11in clutch GM3899621 made in USA — $179.00

3191 58-64 Clutch fork pivot stud in bell housing — $16.50

6460 58-64 Lakewood bell housing for all 3 and 4 spd transmissions up to an 11in clutch — $489.50

8339. 60-62 Original bell housing bolts set — $14.00

6916 Adjustable clutch fork pivot stud in bell housing — $52.00

8774 Adjustable dowel pins for (15000) Lakewood bell housing set — $35.50

05.090 Clutch linkage hardware

5293 3/8 Coarse jam nut use w/SC5294 — $1.10

3201 57-61 Clutch rod pin — $7.50

3200 57-61 Small block clutch fork push rod swivel for original clutch fork push rod threaded 3/8x32 cannot be used w/re-pro rods — $32.00

5294 57-63 Clutch fork push rod swivel not threaded for 57-61 small block clutch push rod use w/2--3/8x24 fine thread jam nuts our SC8472 for all 62-63 clutch fork push rods use w/ 2--3/8 course thread jam nuts SC5293 also for 62-63 clutch pedal push rod use — $28.00

5616 58 Bell crank to pedal push rod bolt OEM type — $12.05

5617 58 Bell crank to pedal push rod bushing OEM type — $24.00

5295 58 Up clutch linkage rod clip — $3.48

5618 58 Up pedal clutch retainer clip — $12.00

7073 58 Upper clutch return spring adjuster — $43.45

7072 58-60 Upper clutch return spring retainer GM#3754496 — $18.50

7792 58-64 Bell crank frame ball/stud — $21.73

3191 58-64 Clutch fork pivot stud in bell housing — $16.50

1061 58-64 Rebuild kit includes pivot ball studs seals retainers clips set — $44.95

5611 59-61 #3 Clip pin for push rod to bell crank — $4.24

5610 59-61 348/409 Clutch fork push rod swivel 3/8x24 thread cannot be used w/orginal clutch fork push rods — $29.04

7025 60 Clutch pedal bolt on brkt — $33.00

5320 61 Clutch fork push rod pin — $29.04

4270 62-64 348/409 Swivel clutch fork push rod — $29.04

6916 Adjustable clutch fork pivot stud in bell housing — $52.00

7485 Bell crank block/ball stud — $22.94

5619 Brake/clutch pedal bushing — $6.60

05.090 Clutch rod firewall seals

5782 58 Firewall clutch rod felt seal — $18.00

5943 59-60 Clutch rod to firewall seal — $44.77

5640 61-62 Clutch rod to firewall seal — $40.26

05.092 Clutch linkage spring

6691 57-58 Clutch pedal return spring under dash — $28.00

3202 57-61 Clutch rod spring lower — $17.03

6692 58-60 Clutch pedal return spring to lever link — $9.90

1061A 58-72 Throw out bearing retainer spring to clutch fork — $19.75

9456 59-60 Clutch pedal return spring — $36.95

9457 61 Clutch pedal spring — $48.95

1080 62-65 Clutch linkage pullback spring bell crank to body upper GM #3813226 — $18.50

1081 62-65 Clutch linkage spring bell crank to fork GM #3813227 — $15.75

05.094 Clutch release (throwout) bearings

4848 56-70 Long clutch release bearing w/diaphragm clutch straight fingers — $61.50

4849 56-70 Short clutch release bearing w/coil spring clutch and 64 up diaphragm clutch w/bent fingers — $34.95

7752 Center Force throw out bearing — $74.00

05.096 Clutch fork boot

1084A 58-60 Leather clutch fork boot 2x4.5in — $29.75

4208 61-63 348/409 Clutch fork boot fits bell housing w/2.5x5in opening — $42.00

1084 62 Up clutch fork boot all except 62-63 409 also fits 64-65 409 bell housing w/2.5x3in opening — $13.80

6798 Clutch fork boot for Lakewood bell housing — $64.95

05.098 Clutch forks

3574 58-60 Clutch fork all — $75.50

7601 61-63 Clutch fork 61-62 All V8 and 63 409 used w/bell housings 552 and 553 — $114.95

4815 63-72 Clutch fork all V8 except 63 409 — $55.00

6827 Clutch fork change over 64 and newer bell housing w/63 and older linkage — $125.00

05.100 Clutch pedal push rods

5293 3/8 Coarse jam nut use w/SC5294 — $1.10

3200 57-61 Small block clutch fork push rod swivel for original clutch fork push rod threaded 3/8x32 cannot be used w/re-pro rods — $32.00

5294 57-63 Clutch fork push rod swivel not threaded for 57-61 small block clutch push rod use w/2--3/8x24 fine thread jam nuts our SC8472 for all 62-63 clutch fork push rods use w/ 2--3/8 course thread jam nuts SC5293 also for 62-63 clutch pedal push rod use — $28.00

5620 58 Clutch pedal push rod through firewall — $72.60

5621 59 Clutch pedal push rod through firewall — $72.60

5622 60 Clutch pedal push rod through firewall — $72.60

5279A 61 Clutch pedal push rod through firewall — $78.65

5279 63-64 Clutch pedal push rod upper Needs SC#5294 (2 per) and SC#5293 (2 per) — $90.75

05.104 Clutch fork push rods

8472 3/8x24 Jam nut use w/SC5604 and SC5605 when using SC5294 — $1.10

5604 58-60 Small block clutch fork push rod OAL 12 3/4 flat tab w/hole on clutch fork end 3/8x24 threads on Z-bar end also for 58 348 — $43.95

5605 59-60 348/409 Clutch fork push rod OAL 10 7/16 flat tab w/hole on clutch fork end 3/8 x 24 threads on Z bar end must be used w/SC5610 swivel — $48.35

5319 61 348/409 Clutch fork push rod OAL 10 7/16 90 degree bent pin on clutch fork end 3/8x24 threads on Z-bar end must be used w/SC5610 swivel Type B — $64.35

5608 61 Small block clutch fork push rod OAL 12 3/4 90 degree bent pin on clutch fork end 3/8x24 threads on Z-bar end Type B — $64.35

4292 62 All V8 and 63 409 clutch fork push rod OAL 9 3/4 ball w/pin on clutch fork end 90 degree bent pin on Z-bar end Type C — $64.89

5606 63 Small block and 64 all V8 clutch fork push rod OAL 10 1/8 ball w/pin on clutch fork end 90 degree bent pin on Z-bar end Type C — $65.56

8858 Adjustable clutch fork push rod ball w/pin on clutch fork end 90 degree bent pin on Z bar end adjusts approx 8 1/4 to10 1/4 Type C — $96.99

05.150 Four-speed backups

1177 58 Dash wire harness to back up switch — $34.00

1062 58-62 Back up light switch w/manual transmission — $71.00

1181 58-63 4 Spd back up linkage rod and clips w/T-10 transmission — $8.99

1179 58-63 4 Spd back up switch bracket w/T-10 transmission — $36.30

1183 58-64 4 Spd back up bracket screws set — $1.10

1182 58-68 linkage rod clips set of 2 — $1.82

5350 58-70 Back up switch shield — $16.90

1177A 59-60 Dash wire harness to back up switch — $37.00

1177B 61-62 Dash wire harness to back up switch — $34.00

1062A 63 Back up light switch w/manual transmission — $71.00

1177C 63 Dash wire harness to back up switch — $38.00

6624 63 Up 4 Spd back up switch linkage rod and clips w/Muncie transmission — $9.50

3197 63-65 409 return line clamp rear of engine, also 58-65 4 speed wire harness clamp — $6.05

1062B 64 Back up light switch w/manual transmission — $71.00

1177D 64 Dash wire harness to back up switch — $37.00

1180 64-68 4 Spd back up switch bracket w/Muncie transmission — $26.62

05.190 Transmission mounts

7078 58 Transmission cross member for 700R4 — $129.00

7077A 58 Transmission cross member for powerglide/turboglide and turbo 350 — $129.00

7077 58 Transmission cross member for turbo 400 — $129.00

1196AS 58-62 Solid tranmission mount cast iron powerglide — $33.00

1196A 58-62 Transmission mount rubber/cast iron powerglide — $84.45

7662 59-64 Crossmember transmission support — $87.99

6676 59-64 Transmission cross member for 700R4 — $129.00

6675 59-64 Transmission cross member for turbo 400 — $129.00

7123 All auto/manual mounts except cast iron powerglide polyurethane — $49.95

1196 All auto/manual mounts except cast iron powerglide rubber — $15.20

1196S All automatic/manual transmission mounts solid except cast iron powerglide — $55.00

5291 Transmission mount shim pack of 3 — $11.50

5290 Transmission mount spacer — $2.73

05.230 Clutches and flywheels

6608 12in Clutch kit 348/409 10 spline — $195.00

2059 348/409 58-64 Flywheel ring gear w/manual transmission 168 teeth 14 3/16 OD — $28.95

8860 348/409 Aluminum flywheel w/manual transmission fits 10.5 and 11in clutch 168 teeth 14 3/16 OD — $489.00

3882 348/409 Flex plate powerglide turbo 350 and 400 700R4 168 teeth — $99.80

6293 348/409 flex plate shim spacer .072" — $8.80

2058 348/409 Flywheel w/manual transmission fits 11 and 10.5in clutch 168 teeth 14 3/16 OD — $254.90

6464 58-64 10.5in Center force clutch 10 spline kit — $579.00

6462 58-64 10.5in Center force clutch 26 spline kit — $449.00

6465 58-64 11in Center force clutch 10 spline kit — $469.00

6463 58-64 11in Center force clutch 26 spline kit — $579.00

5941 58-72 10.5in Clutch kit 11 5/8 bolt pattern 10 spline, clutch, pressure plate, pilot bushing, alignment tool, short throw out bearing included — $159.00

5942 58-72 11in Clutch kit 12 9/16 bolt pattern 10 spline, clutch, pressure plate, pilot bushing, alignment tool, short throw out bearing included — $159.00

6274 Flywheel use with 409/348 stroker motor for externally balanced crank Not for Eagle or Scat crank 4 — $159.50

05.310 Speedometer gears

4852 58 Up speedometer gear retainer automatic transmission — $3.04

3282 58-64 58-64 Speedometer gear in stransmission 18 teeth (brown) — $15.00

8200 58-64 Chev speedo gear set with holder includes 18 19 20 21 22 tooth gears — $69.00

3280 58-64 Speedometer gear in transmission 21 teeth (red) — $15.00

3283 58-64 Speedometer gear in transmission 19 teeth (natural) — $15.00

3281 58-64 Speedometer gear in transmission 20 teeth (blue) — $15.00

3284 58-64 Speedometer gear in transmission 22 teeth (green) — $15.00

3285 58-64 Speedometer gear in transmission 24 teeth (yellow) — $19.95

3287 58-64 Speeometer gear in transmission 23 teeth (black) — $15.00

6508 58-64 Transmission speedometer gear holder — $19.95

05.350 Speedometer cables and housing

3647 63in Speedometer cable/plastic housing this is the most common one for most 4spd trans — $28.75

7062 70in Speedometer cable/metal housing — $24.95

7924 Speedo cable lube (4 gram tube) — $8.50

7381 Speedometer cable core kit — $6.16

2118 Speedometer cable/plastic housing 73in long — $59.00

7380 Speedometer cable/plastic housing 83in long — $21.95

05.380 Transmissions

6461 58-64 Richmond Gear Super T-10 4spd transmission new w/264 1st gear — $2,450.00

8579 Street Fighter Chevrolet 700R4 transmission 30 spline 450-550HP — $3,028.95

8576 Street Fighter Chevrolet TH350 transmission 6in tail shaft 575hp non lockup — $3,023.95

8577 Street Fighter Chevrolet TH350 transmission 9in tail shaft 575hp non lockup — $2,936.95

8578 Street Fighter Chevrolet TH400 transmission 4in tail shaft 725hp non lockup — $3,124.95

05.390 Automatic transmission parts

5238 55-70 Cooling line to transmission fitting — $4.13

5237 55-70 Transmissioin line to radiator fitting 2 required — $5.99

5814 58 Transmission indicator delete for cars w/4spd — $19.80

6574 58-62 Dipstick for cast iron power glide OAL 18.5in cap to full 14 7/8in — $42.90

6575 58-62 Dipstick tube for cast iron power glide OAL 13 1/8 in 1in OD — $42.90

5068 58-62 Steel cooling lines for cast iron power glide set — $69.50

6893 58-62 Transmission stainless steel cooling lines cast iron powerglide set — $90.75

8298 58-63 Full size 700R transmission cooling lines stainless steel set — $90.75

8297 58-63 Full size 700R transmission cooling lines tinned steel set — $70.00

3361 58-64 Oil cooling line clip — $6.00

6166 58-64 Transmission cooling lines for Turbo 350/400 steel set — $66.55

6167 58-66 Transmission cooling lines for Turbo 350/400 stainless steel set — $90.75

6890 59-61 Steel transmission cooling lines turboglide set — $49.50

6891 59-61 Transmission cooling lines turboglide stainless steel set — $90.75

3028 62 Up power glide clutch band — $90.00

3657 62-64 Transmission cooling lines for aluminum power glide tin steel set — $70.00

6892 62-64 Transmission stainless steel cooling lines aluminum powerglide set — $90.75

6576 62-65 Dipstick for aluminum power glide all black except 409 — $76.95

5057 63 SS Impala Nova powerglide reverse light and neutral safety switch linkage rod GM#3829470 — $42.35

8526 Replacement linkage for SC#7584 63 SS Impala neutral and reverse lights switch Will not work on original switch — $42.35

05.390 Kick down linkage

6493 58-62 Kick down linkage bell crank cross shaft all V8 — $95.90

6494 58-62 Kick down linkage lower rod all V8 — $43.95

6492 58-62 Kick down linkage upper rod w/swivel 348 — $39.60

6491 58-62 Kick down linkage upper rod w/swivel all V8 except 348 — $39.60

6497 63-65 kick down linkage bellcrank cross shaft all V8 — $95.90

6498 63-65 kick down linkage lower rod all V8 — $43.95

6496 63-65 kick down linkage upper rod w/swivel 409 — $39.60

6495 63-65 kick down linkage upper rod w/swivel all V8 exc 409 — $39.60

05.391 Vacuum modulators

5384 58-62 Vacuum modulator line cast iron PG set — $51.43

5386 62-65 Vac modulator line wo/clip with power glide 348 set — $51.43

5385 62-65 vacuum modulator line w/clip 409 all powerglide — $59.90

7382 Vacuum modulator valve 63 2nd design powerglide aluminum case with 2pc. modulator 64 all except W/153 194 engines — $39.95

05.430 Hurst shift kits

5832 58 Up Hurst Comp Plus shift body — $599.97

8161 58-59 Hurst 4spd shift kit for T10 w/rear mount shift body — $1,119.00

7863 58-63 Hurst 4spd shift bench seat w/69 up Muncie includes comp plus shift body ball handle and install kit — $1,119.00

3985 58-63 Hurst 4spd shift bench seat w/T10 includes ball handle comp plus shift body and install kit — $1,119.00

6851 58-63 Hurst shift kit bench seat w/63-68 Muncie includes ball handle comp plus shift body install kit — $1,119.00

8076 59-60 Hurst linkage for T-10 rear mount kit — $313.00

3986 62 SS Hurst 4spd shift T10 includes ball handle comp plus shift body install kit — $1,119.00

7864 62 SS Hurst 4spd shift w/69 up Muncie includes ball handle comp plus shift body install kit — $1,119.00

6846 63 SS Hurst shift kit w/63-68 Muncie trans includes ball handle comp plus shift body install kit — $1,119.00

7865 63 SS Hurst shift kit w/69 and up Muncie includes ball handle comp plus shift body and install kit — $1,119.00

6105 63 SS Hurst shift kit w/T10 includes ball handle comp plus shift body install kit — $1,119.00

6107 64-67 Hurst shift kit bench seat w/63-68 Muncie trans includes ball handle comp plus shift body install kit — $1,119.00

7867 64-67 Hurst shift kit bench seat w/69 and up Muncie 4spd includes ball handle comp plus shift body install kit — $1,119.00

7866 64-67 Hurst shift w/69 and up Muncie includes ball handle comp plus shift body install kit — $1,119.00

4505 64-67 SS Hurst kit w/63-68 Muncie includes ball handle comp plus shift body install kit — $1,119.00

9196 GM Hurst shift plate for Muncie and BW-T10 — $58.30

8563 Hurst Comp Plus shift body/flat handle/ball — $629.00

5834 Hurst linkage for 63-68 Muncies trans arms attach w/stud and nuts kit — $313.00

7823 Hurst linkage for 69 and newer Muncies trans arms attach w/bolts kit — $313.00

6713 Hurst linkage for Saginaw Comp Plus linkage kit for Saginaw trans — $349.95

5833 Hurst linkage for T-10 forward mount kit — $313.00

05.470 Shift handle balls

8353 58-63 Shift knob black no pattern 1 5/8 OD 5/16 thread — $9.00

8352 58-63 Shift knob black no pattern 1.5 OD 5/16 thread — $9.00

3370 58-63 Shifter ball white w/4 speed pattern 1 1/2 OD 5/16 thread — $11.00

3369 58-63 Shifter knob white w/no pattern 1.5 OD 5/16 thread — $11.00

5352 64-67 Chrome shift knob no pattern 1 5/8 OD 5/8 thread — $27.00

5353 64-67 Shift knob black chrome no pattern 1 5/8 OD 5/8 thread — $20.85

5494 64-67 Shift knob white 4spd pattern 1 5/8 OD 5/8 thread — $36.95

05.510 Shift boots

5309 58-59 Floor shift boot ring w/screws — $28.05

4869 58-59 Shift boot w/bench seat — $75.95

4272 60-63 Floor shift boot ring w/screws — $28.05

3630 60-63 shift boot bench seat and 63 SS lower w/powerglide — $29.95

3630A 61 SS shift boot — $71.50

3631 62 Impala SS shift boot — $85.75

3632 63 SS 4 speed boot — $59.95

5777 63 SS Upper shift power glide boot — $73.50

8490 64 Bench seat vinyl carpet trim 4spd — $71.50

5313 64 boot ring w/screws — $30.20

3634 64 Lower shift boot — $78.50

3633 64 SS Upper shift boot — $59.50

05.550 Shifter linkage (misc.)

6573 58-63 Shifting linkage rod kit for Borg/Warner T-10 all rods all levers and pins — $205.00

8217 58-66 Shift linkage rod swivel w/ rubber grommet — $17.50

8246 59-63 Original 4spd transmission shifter linkage cover — $6.00

3712 61-63 Column shift lever knob — $27.95

3193 61-64 Neutral safety backup switch w/power glide column shift only — $34.00

6569 63 Power glide shift linkage rod w/SS floor shift — $52.80

7584 63 SS Powerglide neutral safety switch kit — $445.00

9023 63-65 Power glide shift linkage rod swivel — $36.00

6568 63-65 Powerglide transmission shifting lever w/SS floor shift — $55.00

7583 64 Neutral safety switch Impala SS w/powerglide — $45.00

6570 64 Power glide shifter linkage rod w/SS floor shift — $66.00

3660 64 Up reverse lock out cable — $26.33

6572 64-65 SS powwerglide shift linkage rod swivel — $36.00

3744 64-67 Automatic transmission floor shift lever release button — $25.95

5955A Hurst shifter nylon bushing/clip set Pit Pack — $26.95

5955 Hurst shifter plastic bushing and clip set- Pit Pack — $24.50

05.590 Shift handles

3365 58-63 Chrome shift handle bench seat for use w/Hurst body — $90.75

3367 62 Chrome shift handle SS for use w/Hurst body — $90.75

3368 63 Chrome shift handle SS for use w/ Hurst body — $90.75

4882 64-67 Chrome shift handle Corvette 4 speed for use with Hurst body — $82.50

4788 64-67 Shift handle for full size bench seat for use w/Hurst body — $90.75

4231 64SS Chrome shift handle and 64 Chevelle for use w/Hurst body — $90.75

4883 68-82 Chrome shift handle Corvette 4 speed for use with Hurst body — $82.50

8564 Hurst flat shift handle w/white 4spd ball — $118.00

05.600 Transmission tunnel extensions

2311 60 -63 Transmission tunnel extension seal — $59.00

4242 60 Transmission tunnel extension 4 speed — $65.45

5938 61-63 Template for transmission tunnel extension — $11.00

4243 61-63 Transmission tunnel extension 4 speed and auto — $79.95

8491 64 Shifter opening template, console and bench seat. — $11.00

05.610 Pilot bearings

6817 348 Pilot bearing set use when converting a crank designed for turbo or power glide to 3 or 4 speed transmission — $28.00

3190 58-64 All 3 and 4spd pilot bearing — $8.00

3190A 58-72 Clutch pilot bearing HD w/needle bearings — $31.50

05.620 Transmission rebuild kits

6544 58-63 Borg/Warner T10 gasket and seal kit — $32.50

6545 58-63 Borg/Warner T10 shifting fork — $49.00

6543 58-64 Borg/Warner T10 master rebuild kit — $170.00

6548 62-63 Power glide aluminum filter and gasket kit — $14.95

6546 62-73 Power glide aluminum master rebuild kit — $69.95

6547 62-73 Power glide aluminum master rebuild kit high performance — $188.50

6557 63-64 Muncie master rebuild kit early w/ 7/8in counter shaft — $151.95

6558 63-64 Muncie shifting fork — $49.00

8489 Borg Warner T10 tail housing bushing — $14.00